Maintenance and maintenance of the fork pulling actuator is the key to ensure its normal operation and extend its service life. Here are some common care and maintenance methods:
In the industrial field, the actuator usually refers to the device used to control the valve. Actuators are usually used in conjunction with valves to open, close, or adjust the position or opening of the valve to control the flow of fluid (liquid, gas, or steam) in the pipeline. The actuator can be
1, the switch action of the actuator is driven by the air source, which is called DOUBLEACTING(double acting). Take DA series pneumatic actuator as an example: the output torque of gear bar actuator is obtained by the piston pressure (supplied by the air source pressure) multiplied by the upper pitch circle radius (lever). And low friction resistance and high efficiency. The output torque is linear for both clockwise and counterclockwise rotation. Under normal operating conditions, the recommended safety factor of the double-acting actuator is 25-50%.